|

-
We
use and highly recommend Mark Grant G1000HD Cables
-
This is a new high quality
audio cable that has taken one year of research and development
-
The G1000HD cable has been produced to Marks own design to an extremely high
specification
-
The central conductor is a single solid core of high purity copper, this is surrounded by low density gas injected dielectric insulation and a dual layer shielding system consisting of two layers of dense coverage high purity copper and a very flexible clear
sheathing
-
The connectors are Canare phono
RCA (Canare part number RCAPC53). They are crimped so no solder is used. This is one of the reasons the cable performs so well
-
The
G1000HD 6 channel audio interconnects are the perfect partner to
the Special Edition OPPO BDP-83SE
or the OPPO BDP-83
-
0.75m
long 6 channel set £175.00 including VAT
-
1.00m
long 6 channel set £187.50 including VAT
-
1.50m
long 6 channel set £212.50 including VAT
G1000HD Image Gallery (Click to
Enlarge)


-
We
use and recommend Mark Grant DSP 2.5 Mains Cables
-
High performance three core 2.5 mm fully shielded mains cable
-
High purity copper conductors
-
Tightly twisted core construction - more twists per foot than any 'off the shelf' power cable
-
High performance total shielding system consisting of clear
Mylar polyester film, a dual over lapped layer of aluminium foil and then dense tinned copper braid - the highest shielding coverage of any power cord available
-
Extremely flexible high quality outer jacket
-
M&K
Tough Plug with silver plated pins (UK Only)
-
Fitted with high
quality Martin Kaiser silver plated IEC connector
-
UK
plug to IEC 1.50m £55.00 including VAT
-
Schuko
/ Euro plug to IEC 1.50m £55.00 including VAT
DSP 2.5 Image Gallery (Click to
Enlarge)
|
|

|
|

-
OPPO High End Certified HDMI Cables
-
15'
& 25' are 24AWG heavy
gauge 10mm diameter cable
-
Gold
plated connectors
-
1080p
rated
-
HDMI
1.3 rated
-
3'
/ 0.9 meter £13.99 including VAT
-
6'
/ 1.8 meter £17.99 including VAT
-
15'
/ 4.6 meter £22.99 including VAT
-
25'
/ 7.7 meter £28.99 including VAT
|
|

-
Belden
Category 2 HDMI 1.3b Cables
-
Not
fancy to look at, or cheap, but one of the most thoroughly
tested cables on the market from the most advanced cable
manufacturer in the world
-
Certified
Category 2 HDMI 1.3b for advanced high definition
applications up to 1080p
-
7m cable is Category 1 HDMI 1.3b
certified to 1080i. Perfect at 1080p in our testing here
-
Gold
plated connectors, and manufacturing quality you can see
-
1m
£20.99 including VAT
-
2m
£24.99 including VAT
-
3m
£29.99 including VAT
-
4m
£32.99 including VAT
-
7m
£45.99 including VAT
Belden HDMI Cable Technical
|
|

-
Mains
Adapter IEC C14 to C7 Figure of Eight
-
Allows
the use of high performance mains cables
-
C14
is regular IEC connector
-
C7
is figure of eight (or Telefunken connector) often found on DVD
players etc
-
Also
fits C7 polarised connectors (one flat side to figure of eight.
Often used on USA equipment)
-
£7.99
each including VAT
|
|

-
Mains
Adapter IEC C14 to C5 Clover Leaf
-
Allows
the use of high performance mains cables
-
C14
is regular IEC connector
-
C5
is "Clover Leaf" 3 pin connector
-
£8.99
each including VAT
|
|

-
Universal
projector ceiling mounting kit
-
155mm
drop from ceiling (Top of ceiling plate to bottom of legs)
-
Rated
for projectors up to 15Kg. Heavy duty steel and aluminium
construction
-
Can
use 3 or 4 aluminium mounting legs
-
3
legs span out to a triangle 300mm each side hole centre to
centre
-
4
legs span out to a rectangle 280mm x 200mm hole centre to centre
-
Swivel
360º and tilt +/- 30°
-
Neat
and well made. Designed for home cinema, not commercial installations
like most low cost "industrial looking" mounts
-
Black
or White finish. Mounting hardware included
-
Lower
section can be fitted to the projector, upper section is mounted
on the ceiling, then the two are joined with just two bolts for
ease of installation
-
If
you are not sure if this mount will fit your projector, please Contact
Us with the projectors model number and we will check for
you
-
£37.99
including VAT
|
|
-
Vision
FC4 HDMI to Component Convertor
-
Use
HDMI into a display that does not have an HDMI input
-
Input
HDMI 480p to 1080p
-
Output
Component video
-
Stereo
audio out also available from some sources
-
£139.00
including VAT
|